Panchroma™ Marble PLA

6.000 Ft 7.300 Ft

Ezért a termékért 0,5 MakerPont jár

13 left

OBTRA / Polymaker Panchroma™ Marble PLA is a natural marble and stone-effect PLA filament, combining a decorative appearance with easy, reliable printability. The grainy, stone-like surface helps hide layer lines, making it particularly suitable for sculptures, figurines, architectural models, and design objects.

The filament can be used with most FDM/FFF 3D printers without special settings and is recommended with a 0.4 mm or larger nozzle.

Key features

natural marble and stone effect
fine grainy appearance
less pronounced layer lines
easy and reliable printability
for decorative models and figurines
for architectural models
for FDM / FFF 3D printers
1.75 mm diameter
1 kg spool

Tip: The marble effect is particularly striking on larger, continuous surfaces and simpler geometries. For the best surface, a nozzle of at least 0.4 mm and adequate cooling are recommended.

Exact printing parameters and product specifications can be found at the bottom of the page, under technical data. Actual shade and marble effect may vary slightly depending on screen settings and printing parameters.

Márka / Gyártó Polymaker // Panchroma™

Tárolás Store in a dry, enclosed place, protected from moisture

Nyomtatási környezet Open or closed; a closed chamber is not necessary

Maximális nyomtatási sebesség 300 mm/s

Ajánlott nyomtatási sebesség According to standard PLA profile

Tárgyasztal-hőmérséklet 25–60 °C

Fúvóka-hőmérséklet 190–230 °C

Mérettűrés ±0.02 mm

Nettó tömeg 1 kg

Átmérő 1.75 mm

MakerPont érték 0.5