Polymaker PLA Glow-in-the-dark

9.000 Ft 10.000 Ft

Ezért a termékért 0,5 MakerPont jár

14 left

The Polymaker PolyLite™ Glow PLA is a glow-in-the-dark PLA filament that combines the easy printability of PLA with a special phosphorescent effect. It is an ideal choice for decorations, figurines, markers, and creative models where a glowing appearance is part of the design.

The filament stores energy when exposed to light, then gradually re-emits it in the dark. For the strongest glow effect, the finished print should be exposed to strong light or UV light before use.

Key features

glow-in-the-dark, phosphorescent effect
easy-to-print PLA material
good surface quality
low shrinkage
for decorations and creative models
for figurines, markers and design prints
for FDM / FFF 3D printers
1.75 mm diameter
1 kg spool

Tip: The intensity and duration of the glowing effect depend on how much light the model received beforehand. A more intense glow effect can be achieved by using strong light or UV light.

Important: Glow pigments are abrasive, so for regular use, a hardened / wear-resistant nozzle is recommended. Polymaker suggests a nozzle of at least 0.4 mm.

Exact printing parameters and product specifications can be found at the bottom of the page under technical data. Depending on screen settings, lighting conditions and printing parameters, the actual shade and glowing effect may vary slightly.

PolyLite™ Glow PLA is available under the name Panchroma™ Glow PLA in Polymaker's current product range.

Márka / Gyártó Polymaker // PolyLite™

Tárolás In a dry, enclosed place, protected from moisture

Nyomtatási környezet Open or closed FDM/FFF printer; enclosed print chamber not required

Maximális nyomtatási sebesség 200 mm/s

Ajánlott nyomtatási sebesség 40–60 mm/s

Tárgyasztal-hőmérséklet 25–60 °C

Fúvóka-hőmérséklet 190–230 °C

Mérettűrés ±0.02 mm

Nettó tömeg 1 kg

Átmérő 1.75 mm

MakerPont érték 0.5